How to calculate a blood type Punnett square (ABO and Rh)

Table of contents
  1. The three ABO alleles
  2. How to calculate a blood type Punnett square, step by step
  3. Worked example 1: type A × type B, both heterozygous
  4. Worked example 2: type AB × type B
  5. Worked example 3: type B × type O
  6. Working backwards from a child’s blood type
  7. Adding the Rh factor: a blood type Punnett square as a dihybrid cross
  8. Worked example 4: Iᴬi Dd × Iᴮi Dd
  9. Common questions
  10. Is blood type codominant or dominant?
  11. How many alleles are there for blood type?
  12. Can two type O parents have a type A child?
  13. Can a type AB parent have a type O child?
  14. Is Rh factor part of the ABO gene?
  15. Can the CrossCalc calculator do blood type Punnett squares?
  16. Practice problems
  17. Where the model stops
  18. Related
  19. Sources

Level: High school · You’ll need: how to write genotypes and alleles and a basic Punnett square

To calculate a blood type Punnett square, write each parent’s ABO genotype using the three alleles Iᴬ, Iᴮ and i, split each genotype into its two possible gametes, fill in the 2 × 2 square, then turn each box’s genotype into a blood type. Iᴬ and Iᴮ are codominant (a person with both is type AB), and both are dominant over i (only ii is type O).

The method is the same as any one-gene cross. The new part is that the gene has three alleles instead of two, and two different dominance patterns at once.

The model on this page: blood type is treated as one gene with three alleles; each parent passes on one allele, each with a ½ chance; every box in the square is equally likely; and the fractions are probabilities for each child, not a promise about how many children in a family will have each type. All the people named here are fictional. This page is about inheritance only. It isn’t medical advice and doesn’t cover transfusions or pregnancy.

The three ABO alleles

The ABO gene has three main alleles in the classroom model. They’re written as a base letter I with a superscript, plus a lowercase i (typed as I^A, I^B and i when you can’t use superscripts):

AlleleWhat it does
IᴬCodes for an enzyme that adds the A antigen, a marker, to red blood cells
IᴮCodes for an enzyme that adds the B antigen
iCodes for an enzyme that doesn’t work, so it adds neither antigen

A person carries two of these alleles, one from each parent. That gives six genotypes but only four blood types (phenotypes):

GenotypeHomozygous or heterozygous?Blood typeWhy
IᴬIᴬHomozygousAOnly A antigen
IᴬiHeterozygousAIᴬ is dominant over i
IᴮIᴮHomozygousBOnly B antigen
IᴮiHeterozygousBIᴮ is dominant over i
IᴬIᴮHeterozygousABIᴬ and Iᴮ are codominant: both antigens show
iiHomozygousONo A or B antigen

Two things follow from this table:

  • Type A or type B doesn’t tell you the genotype. A type A person could be IᴬIᴬ or Iᴬi, just as a tall pea plant could be TT or Tt.
  • Type AB and type O do. In this model, type AB is always IᴬIᴮ and type O is always ii (rare exceptions are covered in where the model stops).

How to calculate a blood type Punnett square, step by step

  1. Write both parents’ genotypes. If you only know a blood type, list every genotype that fits it (type A could be IᴬIᴬ or Iᴬi).
  2. List each parent’s gametes. Each gamete gets one allele. Iᴬi makes Iᴬ and i gametes; IᴬIᴬ makes only Iᴬ.
  3. Draw a 2 × 2 square. One parent’s gametes go across the top, the other’s down the side. This page puts the mother’s gametes across the top and the father’s down the side, the same way the calculator does.
  4. Fill each box with one allele from its column and one from its row. Write Iᴬ before Iᴮ, and both before i.
  5. Convert each genotype to a blood type with the table above.
  6. Count the boxes for each blood type and write the result as a ratio, fraction or percentage. Each box is ¼. (More on ratios and percentages.)

Worked example 1: type A × type B, both heterozygous

Maya is type A with genotype Iᴬi. Leo is type B with genotype Iᴮi. What blood types could their children have?

Maya’s gametes are Iᴬ and i. Leo’s gametes are Iᴮ and i.

Maya: IᴬMaya: i
Leo: IᴮIᴬIᴮ (AB)Iᴮi (B)
Leo: iIᴬi (A)ii (O)

All four blood types are possible, each with a ¼ (25%) chance: ¼ A, ¼ B, ¼ AB, ¼ O. The genotypic ratio is 1 IᴬIᴮ : 1 Iᴬi : 1 Iᴮi : 1 ii. Check it in the calculator.

This is the cross that surprises people: a type A parent and a type B parent can have a child of any blood type, including O, if both carry i.

Worked example 2: type AB × type B

If someone with type AB blood and someone with type B blood have a child, what blood types are possible? Sam is type AB, so his genotype must be IᴬIᴮ. Priya is type B, so she could be IᴮIᴮ or Iᴮi. Work out both.

If Priya is Iᴮi:

Priya: IᴮPriya: i
Sam: IᴬIᴬIᴮ (AB)Iᴬi (A)
Sam: IᴮIᴮIᴮ (B)Iᴮi (B)

½ B, ¼ A, ¼ AB, and no chance of type O. Check it in the calculator.

If Priya is IᴮIᴮ: every gamete from Priya carries Iᴮ, so the boxes are IᴬIᴮ, IᴬIᴮ, IᴮIᴮ, IᴮIᴮ: ½ AB, ½ B. Check it.

Either way, a type AB parent always passes on Iᴬ or Iᴮ, never i, so in this model a child of a type AB parent can’t be type O.

Worked example 3: type B × type O

Nadia is type B with genotype Iᴮi. Tom is type O, so he must be ii.

Nadia: IᴮNadia: i
Tom: iIᴮi (B)ii (O)
Tom: iIᴮi (B)ii (O)

½ B, ½ O. Check it in the calculator. If Nadia were IᴮIᴮ instead, every child would be Iᴮi, type B. A cross with an ii parent works like a test cross: it shows which alleles the other parent carries.

Working backwards from a child’s blood type

In genetics problems you’re sometimes given a child’s blood type and asked for the parents’ possible genotypes. Use two rules:

  • Each parent gave the child exactly one of its two alleles.
  • Type O (ii) and type AB (IᴬIᴮ) children give the most information, because in this model their genotype is certain.

Example: a type O child of a type A parent and a type B parent. The child is ii, so each parent passed on an i. The type A parent must be Iᴬi (not IᴬIᴬ) and the type B parent must be Iᴮi. That’s worked example 1 again.

Example: a type AB child with one type A parent. The child is IᴬIᴮ. The type A parent is IᴬIᴬ or Iᴬi, so it has no Iᴮ to pass on; the Iᴮ must have come from the other parent. The other parent therefore carries at least one Iᴮ: type B (IᴮIᴮ or Iᴮi) or type AB (IᴬIᴮ).

For more on this kind of reasoning with ordinary dominant and recessive genes, see the reverse Punnett square.

Blood type isn’t a reliable way to tell whether people are related. Working backwards tells you what the simple model allows. Rare alleles (below) sometimes produce results the simple model says are impossible, and many unrelated people share each blood type. Use these problems to practice genetics reasoning, not to draw conclusions about real families.

Adding the Rh factor: a blood type Punnett square as a dihybrid cross

The “positive” or “negative” in a blood type such as “A positive” comes from a different gene, the Rh (RhD) blood group. The ABO gene is on chromosome 9 and the Rh genes are on chromosome 1, so they’re inherited separately. That makes an ABO-plus-Rh problem a dihybrid cross, and you can use independent assortment to solve it.

Teaching simplification: classroom problems treat Rh as one gene with two alleles, D (RhD-positive, dominant) and d (RhD-negative, recessive). So DD and Dd are Rh-positive and only dd is Rh-negative. Real Rh genetics is more complex. There are two neighboring genes, RHD and RHCE, the Rh system includes dozens of antigens, and in many Rh-negative people d isn’t a separate allele so much as a missing RHD gene. The one-gene model matches the usual RhD-positive/negative pattern, which is why classroom problems use it.

Worked example 4: Iᴬi Dd × Iᴮi Dd

Maya is A positive (Iᴬi Dd) and Leo is B positive (Iᴮi Dd).

The shortcut: solve each gene separately, then multiply.

  • ABO: Iᴬi × Iᴮi gives ¼ A, ¼ B, ¼ AB, ¼ O (worked example 1).
  • Rh: Dd × Dd gives ¾ positive, ¼ negative.
Blood typeWorkingProbability
A positive¼ × ¾3/16
A negative¼ × ¼1/16
B positive¼ × ¾3/16
B negative¼ × ¼1/16
AB positive¼ × ¾3/16
AB negative¼ × ¼1/16
O positive¼ × ¾3/16
O negative¼ × ¼1/16

The probabilities add up to 16/16. That’s a 3 : 1 : 3 : 1 : 3 : 1 : 3 : 1 ratio across the eight types.

The full square has 16 boxes. Each parent makes four gametes: Maya makes Iᴬ D, Iᴬ d, i D and i d; Leo makes Iᴮ D, Iᴮ d, i D and i d. See all 16 boxes in the dihybrid calculator, with gene 2 set up as Rh.

Common questions

Is blood type codominant or dominant?

Both. Iᴬ and Iᴮ are codominant with each other, so IᴬIᴮ is type AB. Each of them is completely dominant over i, so Iᴬi is type A and Iᴮi is type B.

How many alleles are there for blood type?

Three in the classroom ABO model: Iᴬ, Iᴮ and i. That’s an example of multiple alleles: a population can have more than two alleles of a gene, but each person still carries only two. Researchers have found many rarer variants of these alleles too.

Can two type O parents have a type A child?

Not in the simple model. Two ii parents can only pass on i, so every child is ii, type O. Rare exceptions exist, such as the Bombay phenotype described below, which is one reason blood type isn’t a reliable way to tell whether people are related.

Can a type AB parent have a type O child?

Not in the simple model, because a type AB parent passes on Iᴬ or Iᴮ, never i. Two rare exceptions are the cis-AB allele and the Bombay phenotype, both described below.

Is Rh factor part of the ABO gene?

No. Rh is a separate blood group controlled by different genes on a different chromosome. That’s why ABO and Rh assort independently and can be combined as a dihybrid cross.

Can the CrossCalc calculator do blood type Punnett squares?

Yes. The monohybrid cross calculator has an “ABO blood type” pattern. Pick it for a gene and choose each parent’s genotype. The dihybrid calculator can add a second gene for Rh.

Practice problems

Problem 1. Two type A parents, both Iᴬi. What fraction of their children are expected to be type O?

Answer

Each parent makes Iᴬ and i gametes. The boxes are IᴬIᴬ, Iᴬi, Iᴬi, ii. ¼ type O (and ¾ type A). Genotypic ratio 1 : 2 : 1. Check it.

Problem 2. A parent who is IᴬIᴬ and a parent who is IᴮIᴮ have a child. What blood type will the child be?

Answer

One parent can only pass on Iᴬ and the other only Iᴮ, so every box is IᴬIᴮ: type AB, every time. Check it.

Problem 3. Maya (Iᴬi) and Leo (Iᴮi) from worked example 1 have two children. What’s the chance that both are type O?

Answer

Each child is a separate event with a ¼ chance of type O. For both: ¼ × ¼ = 1/16 (6.25%). Having one type O child doesn’t change the chance for the next one.

Problem 4. Ava is B negative (Iᴮi dd) and Ben is O positive (ii Dd). What blood types could their children have, and with what probabilities?

Answer

Solve each gene separately. ABO: Iᴮi × ii gives ½ B, ½ O. Rh: dd × Dd gives ½ positive, ½ negative.

Multiply: ¼ B positive, ¼ B negative, ¼ O positive, ¼ O negative. Check it in the dihybrid calculator.

Problem 5. A fictional family: a child is O negative, one parent is A positive and the other is B positive. Using the simple model, what are the parents’ genotypes?

Answer

The child is ii dd, so each parent passed on i and d. The A positive parent must be Iᴬi Dd and the B positive parent must be Iᴮi Dd. That’s worked example 4, where O negative has a 1/16 chance.

Where the model stops

The three-allele model explains most classroom problems, but it’s a simplification. Two rare situations show why blood type isn’t a reliable way to tell whether people are related.

cis-AB. A few rare ABO alleles make an enzyme that can build both the A and the B antigen. A person with one of these alleles can be type AB even though both antigens come from a single allele inherited from one parent. Such a person can pass the cis-AB allele to one child and their other allele (for example i) to another, so a type AB parent can have a type O child, which the simple model says can’t happen.

The Bombay phenotype. The A and B antigens are built on top of another marker, the H antigen, which is made by a different gene (FUT1). People who inherit two non-working copies of that gene (written h/h) make little or no H antigen on their red blood cells, so they can’t make A or B antigens either. In standard ABO typing their red cells test like type O even if they carry Iᴬ or Iᴮ, and they can still pass those alleles on. The Bombay phenotype is very rare.

Other limits of the classroom model:

  • There are many variant forms of the A, B and O alleles, including weaker versions of A and B.
  • Real Rh genetics involves two genes and many antigens, not one gene with D and d.
  • The probabilities describe what to expect over many children. A family with four children won’t necessarily have one of each type in worked example 1.

For more patterns that don’t fit simple dominant and recessive genes, see beyond Mendelian inheritance.

Sources

  • Dean L. Blood Groups and Red Cell Antigens, chapter “The ABO blood group”. National Center for Biotechnology Information (US), 2005 (three main ABO alleles; A and B codominant over O; ABO gene on chromosome 9).
  • Dean L. Blood Groups and Red Cell Antigens, chapter “The Hh blood group”. NCBI, 2005 (H antigen as the precursor of A and B; FUT1; the Bombay phenotype, h/h).
  • Dean L. Blood Groups and Red Cell Antigens, chapter “The Rh blood group”. NCBI, 2005 (RHD and RHCE on chromosome 1; complexity of the Rh system).
  • Chun S, Choi S, Yu H, Cho D. “Cis-AB, the blood group of many faces, is a conundrum to the novice eye”. Annals of Laboratory Medicine, 2019;39(2):115–120 (one allele producing both A and B antigens; apparently paradoxical inheritance).
  • Fowler S, Roush R, Wise J. Concepts of Biology, 8.3 Extensions of the Laws of Inheritance. OpenStax (ABO as an example of codominance and multiple alleles; six genotypes from three alleles).
Try it: check any cross instantly with the dihybrid cross calculator, or use the monohybrid and trihybrid versions.